Lineshaft conveyors are compatible with a wide range of products manufactured by Peer Conveyors. The equipment range consists of pre-assembled modules comprising drive sections, slave sections, curves, spurs, merges, transfers, stops, supports and a full range of ancillary items. A choice of 7 standard widths and 4 roller pitches ensures the most cost effective combination to suit the application. For ease of installation, rollers will be supplied loose for site fitting in slave sections.
General Specification
Rollers
50mm outside diameter 1.5mm tube - flo-coat electro-plated finish with swaged ends and incorporating grooves for drive/jump belts. Anti static properties. Precision bearings. Axles hexagonal 11mm across flats and spring loaded Side frames 180mm x 45mm x sheet steel C section with return flanges to facilitate accessories and services. The section is precision pierced to retain rollers and cross ties, together with holes in the bottom flange for support fixings.
Cross Ties
Formed galvanised inverted channel section 36mm x 20mm with endplates bolted to side channels.
Line Shaft
Comprising 25mm dia bright drawn mild steel shaft running in sealed lubricated self aligning pillow block bearings at a maximum of 1m pitch. Bearings mounted below cross ties for easy maintenance.
Spools and Spacers
Spools are light low friction profiled moulded plastic units to provide an effective drive contact between the drive shaft and rollers via drive belts. The spools are positioned below the driven rollers at similar pitching. The spool profile ensures the drive belt is located and movement of the spools is limited by low friction spacers which also offer line shaft guarding.
Drive Belts
Produced as endless loops, the elastomeric urethane belts provide the drive between spools and rollers.
Technical Specification of our LS50 Conveyor >
Website maintained and optimised by Web Design Studios | Copyright Amber Industries Ltd © 2007